工装夹具设计的基本原则
1、满足使用过程中工件定位的稳定性和可靠性；
2、有足够的承载或夹持力度以保证工件在工装夹具上进行的施工过程；
3、满足装夹过程中的简单与快速操作；
4、易损零件必须是可以快速更换的结构，条件充分时比较好不需要使用其它工具进行；
5、满足夹具在调整或更换过程中重复定位的可靠性；
6、尽可能的避免结构复杂、成本昂贵；
7、尽可能选用市场上质量可靠的标准品作组成零件；
8、满足夹具使用国家或地区的安全法令法规；
9、设计方案遵循手动、气动、液压、伺服的依次优先选用原则；
10、形成公司内部产品的系列化和标准化。

Basic principles of fixture design
1, to meet the use of workpiece positioning stability and reliability;
2, there is sufficient bearing or clamping force to ensure that the workpiece in the fixture on the construction process;
3, to meet the clamping process simple and fast operation;
4, vulnerable parts must be able to quickly replace the structure, the condition is sufficient to do not need to use other tools;
5, to meet the adjustment or replacement of the fixture in the process of repeated positioning reliability;
6, as far as possible to avoid complex structure, expensive;
7, as far as possible on the market to choose the quality and reliability of the standard components;
8, to meet the use of national or regional safety laws and regulations;
9, the design follows the principle of manual, pneumatic, hydraulic and servo priority;
10, the formation of internal product serialization and standardization.